PUDU CC1 Pro: Autonomous Commercial Cleaning Robot
AI-powered 4-in-1 cleaning with the world's first rear performance camera. Available with the Self-Cleaning Docking Station for fully unattended operation.
The always-on cleaning robot for commercial spaces.
The CC1 Pro combines AI vision recognition, flexible multi-mode cleaning, and fully automated docking to deliver consistent, data-driven cleaning performance in hotels, hospitals, malls, and corporate campuses across the USA.
Specifications per PUDU Robotics and subject to change. Contact us to confirm current specifications for your configuration.
PUDU VSLAM+ Navigation. Unlimited by space.
Powered by a fusion of visual SLAM and LiDAR, the CC1 Pro maps and navigates complex commercial environments with exceptional accuracy. No QR codes, no floor tape, no modifications to your space are ever needed.
- Covers up to 5,000 to 8,000 sq meters per cleaning session
- Navigates multi-floor buildings via optional elevator integration
- Adapts to layout changes automatically over time
- Works reliably in dynamic environments with people moving throughout
Detects stains. Cleans them. Verifies the result.
During routine cleaning passes, the CC1 Pro's AI vision system detects wet stains including coffee spills, sauces, and liquid spills. It immediately generates an optimal cleaning route, targets the area, and its rear AI camera then verifies the stain has been removed. If not, it goes back automatically.
- Cleaning rate of 1,500 to 3,000 sq meters per hour in spot mode
- Detects and responds to stains in real time during operation
- Post-task heatmaps show exactly where stubborn stains were found
- Guided cleaning mode directs staff directly to any remaining problem areas
The robot that reads your floor and adjusts accordingly.
The CC1 Pro's AI Cleaning Intensity Control system continuously monitors floor type, soil level, and cleanliness status to deliver exactly the right cleaning power to every area without wasting water or energy on already-clean surfaces.
- Stubborn stain detection automatically boosts cleaning power when needed
- Floor cleanliness monitoring switches between eco and deep-clean modes dynamically
- Floor type detection adjusts between hard floor and carpet modes automatically
- Significantly reduces water and detergent consumption compared to fixed-mode robots
A robot that checks its own work. In real time.
The CC1 Pro is the world's first commercial cleaning robot with a rear AI camera that continuously monitors the clean floor behind it. If it detects a missed patch, a streak, or a water mark, it automatically flags the area, goes back, and resolves it before moving on.
- Rear AI camera monitors cleaning quality in real time as the robot moves
- Automatically detects leftover stains and triggers immediate spot re-cleaning
- Generates detailed cleaning heatmaps at the end of every task for management review
- Operation dashboard provides full transparency on every cleaning session run
Safe to operate anywhere people are present.
The CC1 Pro's Omni-Sense AI perception system uses multiple sensors to detect static and moving obstacles in real time. The recognition model evolves over time, learning new obstacle types and adapting to new environments to ensure consistent safe operation throughout the robot's lifecycle.
- IEC 63327 certified for professional commercial environments with public access
- Detects both static obstacles and moving people, trolleys, and equipment
- Recognition model updates over the air as new obstacle types are added
- Adjustable speed settings from 0.2 to 1.2 m/s to suit different environments
The station that makes unattended overnight cleaning a reality.
It empties waste, drains dirty water, refills clean water, and cleans its own brushes and squeegee between runs, so the robot keeps working overnight with no one on site.
- Ultrasonic squeegee deep-cleaning prevents streaks and secondary contamination
- Automatic roller brush cleaning after every cleaning cycle without manual intervention
- Auto water refill and dirty water drainage with no plumbing modifications needed
- Auto power charging ensures the robot is always ready for the next session
- Three station tiers: Standard Docking Station, Self-Cleaning Station, Mobile Water Station
The autonomous cleaning loop
Clean
Robot completes scheduled cleaning run autonomously
Detect
AI camera flags any stains or contamination found
Dock
Robot returns autonomously to Self-Cleaning Station
Self-clean
Station deep-cleans brushes and squeegee automatically
Resume
Recharged, refilled, and ready for the next session
See the CC1 Pro in action
CC1 Pro autonomous cleaning operation
Self-Cleaning Docking Station in action
Cleaning you can see, measure, and prove.
The CC1 Pro generates detailed data after every cleaning session. Your operations team can view task completion rates, cleaning heatmaps, maintenance events, and anomaly alerts from a single dashboard. Cleaning becomes a documented, verifiable, and continuously improving process.
- Waste hotspot maps show highest-accumulation zones for better scheduling
- Cleaning performance heatmaps identify stubborn stains requiring manual attention
- Real-time alerts for any equipment anomalies or maintenance requirements
- Manage multiple robots across multiple sites from a single interface
- PuduLink app with E-gate and Elevator integration for full building connectivity
Connects to your entire building. Not just the floor.
The CC1 Pro integrates with building management systems, elevator controls, and e-gate access systems, enabling fully autonomous cleaning across multiple floors without staff intervention.
- PuduLink app for remote fleet management from any device at any time
- E-gate integration for autonomous door and barrier navigation
- Elevator IoT module for multi-floor automated deployment across your building
- 4G, Wi-Fi, and Bluetooth connectivity as standard on every unit
- OTA software updates keep the robot improving without any scheduled downtime
Build the right system for your space.
Choose from a modular range of accessories to create a fully autonomous cleaning ecosystem tailored to your environment.
Self-Cleaning Docking Station
Contact usAutomatically cleans brushes and squeegee after each cycle using 100W ultrasonic and 65°C hot water technology. Strongly recommended for all deployments.
Standard Docking Station
Contact usAutomatic water refill, drainage, and charging. Keeps the robot operational between shifts without manual intervention required.
Mobile Water Station
Contact usFor spaces without fixed plumbing access. Provides flexible water supply and drainage wherever the robot operates.
Elevator IoT Module
Contact usEnables full integration with elevator systems for seamless multi-floor autonomous cleaning operation without any human assistance.
Additional Battery
Contact usExtends operational run-time for larger spaces or those requiring continuous around-the-clock coverage without gaps.
Carpet Vacuum Module
Contact usEnhances vacuum performance on carpeted areas, making the CC1 Pro fully effective in mixed hard floor and carpet environments.
Expandable Waste Container
Contact usLarge-capacity optional dust container for spaces with high debris volumes or extended autonomous cleaning runs between empties.
Battery Charging Adapter
Contact usAllows the additional battery to charge simultaneously with the robot for maximum operational uptime across busy spaces.
PUDU CC1 Pro technical specifications
| Specification | PUDU CC1 Pro |
|---|---|
| Cleaning Modes | Sweeping, (Carpet) Vacuuming, Dust Mopping, Scrubbing |
| Battery Capacity | 50 Ah |
| Charging Time | Approximately 3 hours |
| Run-time (Scrubbing) | 5 hours |
| Run-time (Sweeping and Vacuuming) | 5 hours |
| Run-time (Carpet Vacuuming) | 4 hours |
| Run-time (Silent Mopping) | 9 hours |
| Cleaning Efficiency (all-covered) | 700 to 1,000 sq m/h (7,500 to 10,800 sq ft/h) |
| Cleaning Efficiency (spot/intensive) | 1,500 to 3,000 sq m/h (16,000 to 32,000 sq ft/h) |
| Suction Power | 17,000 Pa |
| Clean Water Tank | 15 L (3.96 gal) |
| Dirty Water Tank | 15 L (3.96 gal) |
| Dustbin Capacity | 2.5 L bin / 6 L dust bag |
| Weight | 75 kg (approximately 165 lbs) |
| Dimensions (L x W x H) | 629 x 552 x 695 mm (24.8 x 21.7 x 27.4 in) |
| Display | 10.1-inch LCD Screen |
| Navigation System | LiDAR + Visual Fusion (VSLAM+), no QR codes required |
| Cruising Speed | 0.2 to 1.2 m/s (0.7 to 3.9 ft/s), adjustable |
| Minimum Path Clearance | 70 cm (28 in) |
| Cleaning Width (with side brush) | 500 mm (19.7 in) |
| Operating Noise | Less than 70 dB(A) |
| Communication | 4G, Wi-Fi, Bluetooth, E-gate and Elevator Control (optional) |
| Auto Charging and Water Refill/Drain | Supported, requires optional docking station |
| Breakpoint Resume | Remembers cleaning progress and resumes after charging without restarting the task |
| Manual Override Handle | Extendable steering handle for manual positioning and setup |
| Safety Certification | IEC 63327 |
| MSRP | $24,000 |